Flashforge · FDM CoreXY
Adventurer 5M Pro
An enclosed printer for a home office or classroom.
$459approx. USD
- 220 × 220 × 220 mm
- 600 mm/s
- Enclosed
- Single colour
Ease8
Speed8
Materials7
Openness4
Value7
Anycubic · FDM CoreXY · 2025
Anycubic Kobra S1 Combo review
Enclosed CoreXY plus a four-colour ACE Pro that doubles as a filament dryer, all for the price of a bare P1S. Rough edges in software, strong hardware value.
Best for: Multi-colour with an enclosure on a mid-range budget.
The PIF Score
6.8PIFEase7
Speed8
Materials7
Openness4
Value8
Five axes, each out of ten, averaged with no weighting. How we score.
What we like
- Enclosed and multi-colour in one bundle
- Integrated filament drying
- Fast for the price
What we don't
- Slicer and firmware need polish
- Colour changes waste filament
- Smaller community
True cost
What it really costs to own in your country
Pre-filled with typical local rates. Change anything to match your own use.
Running cost / year—power · filament
Per print hour—incl. upkeep
3-year total—printer + running
Assumes ~150 W average draw while printing and a small yearly allowance for nozzles, plates and PTFE. An estimate for comparing printers against each other, not a quote.
Full specifications
| Type | FDM CoreXY |
| Released | 2025 |
| Build volume | 250 × 250 × 250 mm |
| Max speed | 600 mm/s |
| Hotend max temp | 320 °C |
| Bed max temp | 110 °C |
| Nozzle | 0.4 mm hardened |
| Bed levelling | Automatic |
| Enclosure | Yes |
| Multi-material | ACE Pro included (4 colours + drying) |
| Connectivity | Wi-Fi, USB |
| Recommended slicer | Anycubic Slicer / Orca |
| Typical power draw | ~150 W while printing (our estimate) |
Specifications are the manufacturer's published figures. "Max speed" is a peak that no printer holds across a whole part, so use it for comparison and don't expect it in real print times.