Bambu Lab · FDM CoreXY dual-nozzle
H2D
Engineering parts, large models and small production runs.
$1,899approx. USD
- 350 × 320 × 325 mm
- 1000 mm/s
- Enclosed
- Multi-colour
Ease8
Speed10
Materials10
Openness3
Value6
Creality · FDM CoreXY · 2024
Creality K2 Plus review
Creality's flagship: a 350 mm heated-chamber cube with multi-colour CFS units and a 350 °C hotend, undercutting the Bambu H2D by a wide margin.
Best for: Large engineering parts on a smaller budget than the H2D.
The PIF Score
7.2PIFEase7
Speed9
Materials9
Openness4
Value7
Five axes, each out of ten, averaged with no weighting. How we score.
What we like
- Huge 350 mm cube with active chamber heating
- Multi-colour up to 16 filaments
- 350 °C hotend for engineering polymers
What we don't
- Firmware maturity trails Bambu
- Physically enormous and heavy
- CFS purge waste is significant
True cost
What it really costs to own in your country
Pre-filled with typical local rates. Change anything to match your own use.
Running cost / year—power · filament
Per print hour—incl. upkeep
3-year total—printer + running
Assumes ~320 W average draw while printing and a small yearly allowance for nozzles, plates and PTFE. An estimate for comparing printers against each other, not a quote.
Full specifications
| Type | FDM CoreXY |
| Released | 2024 |
| Build volume | 350 × 350 × 350 mm |
| Max speed | 600 mm/s |
| Hotend max temp | 350 °C |
| Bed max temp | 120 °C |
| Nozzle | 0.4 mm hardened |
| Bed levelling | Automatic + auto Z offset |
| Enclosure | Yes |
| Multi-material | CFS units (4 colours each, up to 16) |
| Connectivity | Wi-Fi, LAN, USB |
| Recommended slicer | Creality Print / Orca |
| Typical power draw | ~320 W while printing (our estimate) |
Specifications are the manufacturer's published figures. "Max speed" is a peak that no printer holds across a whole part, so use it for comparison and don't expect it in real print times.